04 Nov 2026
Overlock and Flat Seams: What Is Under the Jacket?

Overlock and Flat Seams: What Is Under the Jacket?
An overlock stitch finishes or joins fabric edges with thread wrapping around the cut allowance. A flat seam places edges or layers so the finished join lies relatively flat. Their feel against skin and their appearance inside a jacket are different.
Turn the garment inside out and follow one seam from the underarm toward the hem. Read its construction before treating a tidy stitch pattern as proof of strength.
Find the wrapped edge of an overlock
Look for a row of loops that cross over the raw fabric edge. The overlock can control fraying and, depending on its configuration, join panels. In a knit sweatshirt, it often appears along side seams and sleeve joins where the cloth needs a flexible finish.
Run a fingertip gently along the allowance. You may feel a raised ridge of overlapping fabric and thread. The ridge is an expected result of this construction and does not by itself mean a defect.
Recognise a flatter joined edge
A flat seam can bring fabric edges together with covering stitches so the inside presents less bulk. It is useful where repeated rubbing against skin is a concern. Do not assume every visually flat line is made by the same machine or stitch class.
Examine both sides of the join. Some seams only look flat from the outer face while carrying folded allowances beneath. A true construction comparison needs you to look at the reverse as well.
Think about stress direction
Pull a garment gently along the line where the fabric normally stretches. Observe whether the stitch line extends with it or forms a tight boundary. A seam can look neat while limiting stretch if the thread formation and fabric behaviour are poorly matched.
Avoid aggressive pulling that could damage stitches. You are checking comfortable give during wear, not conducting a destructive strength test. Elbows and underarms reveal more about usability than an isolated decorative topstitch on the front.
Distinguish seam finish from seam position
A seam placed beneath the arm moves and rubs differently from one at a jacket side. Its position can matter as much as whether it is overlocked or flat. For an inner layer, less bulk at a contact point may feel smoother beneath outerwear.
Compare the inside of items in the hoodies and sweaters category and the jacket range. A lined jacket may conceal seam allowances entirely, so the appropriate construction can only be judged in the context of its layers.
Inspect the ends and intersections
Look where a sleeve seam meets a side seam. Several layers of fabric can collect there, making the junction thicker than either seam alone. Check for loose thread tails, skipped stitches or an allowance twisted out of position.
A different seam type does not automatically mean a better garment. The practical questions are whether the join stays intact, moves with the fabric and sits where it does not create persistent pressure.
Inside a garment, an overlock finish can enclose a raw edge with loops of thread. A flat seam aims to leave less bulk where pieces meet. Look closely at where the stitch rows run and whether the fabric edges overlap or meet. The number of visible lines on the outside is not enough to identify every seam type. Turn the section over and follow its structure from both sides.
Frequently Asked Questions
What does an overlock seam look like inside clothing?
Loops of thread wrap around the fabric edge. The seam may leave a raised allowance on the reverse.
Is a flat seam always stronger than an overlock?
No. Strength depends on stitch configuration, thread, material and use. The seam types serve different constructions.
Can an overlock stretch with a knit fabric?
Yes, when the stitch is configured for the fabric. Check the finished garment under gentle movement.
Why does an underarm seam feel thick?
Multiple allowances can meet at the armhole, building a ridge. Construction and placement both affect comfort.
Do lined jackets have visible overlock stitches?
Some do, but a lining can cover internal seam allowances. You may not see the shell construction without opening the lining.
Related reading: Puffer Loft Is Not the Same as Jacket Weight and Where Should a Boxy Hoodie Shoulder Seam Sit?.
